General
45 results found
-
Ability to colour wires
I sometimes run harnesses with 12 or more wire colours (pink, pink/blue trace, white, red, orange, orange/ green trace etc etc) yes I can label the colour but it also make it very quick to identify pathways via colour.
4 votesWire colors are now in version 1.12
-
1 vote
This feature is implemented, you can find it in the Silicon section.
-
remove 1ohm potentiometer issue
the potentiometer has a 1ohm boundary. It is not mathematically correct, and not good when using the potentiometer in low-ohmic circuits. To demonstrate the bug, put a dc source across the pot with a value of 1 or 2 ohms. now vary the pot position.... the voltage at the wiper is not correct. Also observe the R1 and R2 values if setting the pot to 10ohm and the wiper position at 0. You now have an 11ohm potentiometer.
3 votesFortunately this problem has already been solved
-
Add a 'trigger lock' function to the SCOPE
The continuously running scope is not very useful when you can't set a trigger to make the waveform appear stationary.
1 voteYou can trigger the scope. Pause it for a moment, then drag the trigger value to the value you want. Tap it to switch the trigger edge.
-
Have a radio button to allow AC supplies to be set as RMS or p-p
AC supplies are almost always defined by their RMS value.
However, iCircuit seems to assume peak-to-peak which is counter-convention.
A radio button on an AC supply to choose RMS or p-p for the voltage input would be helpful.
1 voteThis will be available in v1.12 coming soon.
-
Modify the JK flip flop (or create a new one) with asynchronous set and reset
This would allow devices like the ‘74 D-type to be simulated
1 vote -
Ad a 74595 shift register with serial-in/paralel-out
There should be a ic shift register with serial-in/paralel-out.
3 votes -
Have the Arduino “attachInterrupt” enabled.
The Arduino device does not recognise the “attachInterrupt”. Without this then circuits that interact by interrupts in real random time with the Arduino cannot be simulated. It may be a big ask, but without it I am stumped in developing my ignition system.
(There may be a French person asking a similar thing, but my French isn’t good enough to be sure...)
3 votes -
3.3V Arduino
I mostly use the AtMega with 3.3V and it would save me a lot of additional design if I could have 3.3V directly out of the Arduino's Pins.
1 voteThis will be in version 1.11.2
-
Remove matrix error
Some circuits i creat have multiple earthy points (auto electrician) every time more than on earth is added to a circuit it creates a matrix error.
1 voteIn v1.11 of the app, the element that is causing trouble for the simulator will be highlighted. Hopefully that will help you determine the short in the circuit.
-
4 votes
In the up-coming 1.11, you will be able to override the OS language and use English.
-
1 vote
-
1 vote
analogRead is supported in 1.9
-
Please add the cmos cd4017 decade counter/divider
It is an extremely useful and popular chip for many diy projects.
8 votesYou can find this IC in the ICs section now!
-
Redo button
Add elimination options for components currently in use, as well as an redo button
1 voteYou can redo by long pressing the Undo button.
-
Display the Pin numbers of IC
It would be very usefull to display the actual pin numbers of IC aside the pin function
E.g for the 555 timer, instead of just CTL it is better to show 5 (CTL).
It helps a lot when taking reference circuits that most of time only show pin numbers9 votesPIN numbers are available in v1.11 and onward
-
Need support for iOS 11
The iOS devices are about to get updated to 11 please tweak this as required
18 votesiCircuit 1.9 added iOS 11 support. Thanks!
-
Add a delete tool
It is very hard to delete things, and especially wires as there can be many different ones that you have to individually delete.
37 votesThis will be available in iCircuit 1.10. Thanks!
-
ad new compoment 74ls83 adder
I would like to use this one and make a diagram but the software doesnt has it. Can you put it in the next version?
http://pdf.datasheetcatalog.com/datasheet/motorola/SN74LS83D.pdf1 voteAvailable now in the ICs section since v1.12
-
555 chip missing ground?
The 555 chip appears to be missing the ground pin?
1 voteYou can choose “Show Ground” in the 555’s properties. This will become the default in version 1.11.
- Don't see your idea?